Skip to main content
Slim Header

Crosby Plate Clamps

Crosby Plate Lifting Clamps - Vertical

Crosby Plate Lifting Clamps - Vertical

CRIP10

The IP10 vertical lifting clamp is used for the lifting, turning, moving, or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Available in capacities of 0.5 through 30 metric tons.

These plate clamps have welded alloy steel bodies for strength and smaller size. Contains forged alloy components where required. Individually proof-tested to 2 times the working load limit (WLL) with certification. Each product is individually serialized, with the serial number and proof load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.

Full 180° turning range for material transfer, turning or moving. Lock open / lock closed ability with latch, for pretension on material and then release of material. Maintenance replacement kits are available.

CRIP10 Diagram

* Select the desired product below to compile your quote

WLL
A (Jaw)
B
C
D
E
F
G
H
J
K
Weight
Product
                         
0.5 T
0-0.63"
1.73"
5.05"
8.16"
1.19"
4.53"
1.61"
1.11"
-
0.39"
4 lb
CRIP10-005
1 T
0-0.75"
1.75"
5.47"
8.46"
1.19"
4.47"
1.63"
1.5"
-
0.39"
4.4 lb
CRIP10-01
2 T
0-1.38"
3.08"
7.91"
13.23"
2.75"
7.47"
2.41"
2.17"
-
0.63"
15 lb
CRIP10-02
3 T
0-1.63"
3.94"
9.95"
17.17"
2.95"
8.86"
3.08"
2.36"
-
0.78"
30.4 lb
CRIP10-03
4.5 T
0-1.63"
3.94"
9.95"
17.17"
2.95"
8.86"
3.23"
2.56"
-
0.78"
33 lb
CRIP10-04

 

Contact your regional Sling-Choker sales representative to request a quote or any additional information

Crosby Rigging Group